Ryterna / Decorative surfaces

Okoume garage doors

Real wood cladding with patterns milled into the surface.

Compare actual builder previews. Your measured opening and written factory specification decide the final door.

Ryterna Okoume wood-clad garage door with diagonal carved detailing

Ryterna style visual. Panel layout, finish and available options need size-specific confirmation.

Garage Door Fix × Ryterna

Ask about Ryterna Okoume

Tell us where the door is going and what you have in mind. We’ll confirm the options and next steps with you.

In the configurator

See how pattern and natural finish change Okoume

These are exact exports from the first-party builder, not installed doors or approved factory drawings. These approved 16 × 7 ft natural-finish previews are references only; other sizes and final price need written confirmation.

16 × 7 ft

OW-1 · Golden Oak

Carved Okoume cladding in the OKU-1 natural finish.

Builder preview of a 16 by 7 foot Ryterna Okoume OW-1 door in Golden Oak

16 × 7 ft

OW-4 · Old Oak

A different carved pattern in the OKU-2 natural finish.

Builder preview of a 16 by 7 foot Ryterna Okoume OW-4 door in Old Oak

16 × 7 ft

OW-9 · Dark Oak

The OW-9 pattern in the darker OKU-3 natural finish.

Builder preview of a 16 by 7 foot Ryterna Okoume OW-9 door in Dark Oak

Open the configurator and choose Okoume from the style menu. This page does not preselect a door in the builder.

Open Ryterna configurator

The 30 selected natural-finish 16 × 7 ft patterns below are planned for future fixed-price offers. No offer is available for purchase yet. Painted previews are colour simulations and are not part of that approved set.

The design

What makes Okoume different

Okoume adds real 12 mm wood cladding to an insulated sectional panel. The face can be milled into a pattern, so the material reads differently from a printed wood-image finish even when both look warm from the street.

How to make it yours

The configurator lets you examine pattern and finish together. A lacquered finish shows the wood; a painted finish can tie the milled pattern to masonry, siding, or the entry door. Ask for a physical sample before deciding from a screen.

Before you choose

What should you check before ordering Okoume?

Ask to see the chosen design at your actual width. A pattern that feels balanced on a single opening may need a different treatment on a double. Confirm the final design code and finish on the written factory specification.

How does Okoume compare with other styles?

For an uninterrupted plane, look at Flush. For a more traditional raised-panel impression, compare Georgian or Retro.

What to send for a useful answer

  • Send the pattern and finish you like, plus a straight-on photo of the house.
  • Your measured opening width and height. The buyer is responsible for measuring before ordering.
  • Your project address so we can confirm whether installation is within 30 minutes of Calgary or Edmonton, or quote delivery-only.
  • Any glazing, finish, access or hardware choice you already have in mind.

Source-checked details

What the documents say about Okoume

  • The Okoume face is real 12 mm Okoume plywood applied over a standard door panel. It is not a printed woodgrain steel finish.
  • Ryterna mills or carves that wood layer for the chosen pattern. The finished face can be lacquered or painted, with the actual pattern and coating stated in the order.
  • Natural wood and printed wood effects age differently. Ask for a physical finish sample and the care instructions for the coating you select.

Check the source

The manufacturer documents describe product options. Your final door needs a size-specific factory specification and written quote.

Ryterna Okoume OW-1 in Golden Oak, shown as a 16 × 7 ft configurator preview
OW-1 · Golden Oak · 16 × 7 ft reference

Approved configurator previews

Choose from ten carved patterns and three natural wood finishes. These are all 30 approved 16 × 7 ft previews from our Ryterna configurator. Your measured size and final finish need factory confirmation.

Images are design previews, not installed-project photos or guaranteed manufactured specifications. The builder shows other sizes and options where available.

Common questions

Before you choose Okoume

Is Okoume a wood-look wrap?

No. Ryterna specifies a 12 mm Okoume plywood cladding over the door panel. The pattern is milled in the cladding.

Will the same pattern fit any door width?

Not automatically. Pattern scale, panel divisions and opening width need a factory drawing for the exact door before an order is approved.

Price planning

What does a Ryterna Okoume door cost?

The 30 selected 16 × 7 ft Okoume pattern-and-finish combinations are the only configurations planned for fixed-price store offers. When published, each exact offer page will show its guaranteed base CAD price and delivery-only scope; only applicable tax is added, with freight and import adjustments absorbed. They are not available for purchase yet. Other sizes, finishes, and options in the configurator remain budgeting estimates and need a written quote. Do not pay a deposit against a builder estimate.

Plan your project

Designed here. Made to order. Delivered where you need it.

Four standard sizes

9 × 7, 9 × 8, 16 × 7, and 16 × 8 ft. Other openings are handled by inquiry after measurement.

Installation or delivery

Installation is available for addresses within a 30-minute drive of Calgary or Edmonton, subject to address confirmation in the written quote. Outside that area, door-only delivery is available across Canada; the buyer arranges installation.

Allow 60–90 days

This is the planned delivery or installation lead time for a confirmed order, not an inventory promise. We confirm the relevant date range before ordering.

Measure before you order

The buyer is responsible for measuring the garage-door opening before placing an order. Share the measured width and height with us so the final specification can be reviewed before the factory order.

Delivery unloading

For a shipped door, the buyer is responsible for unloading the complete door and hardware at the delivery address, including arranging suitable people and equipment.

Deposit and returns

Made-to-order doors require a 50% deposit. It is nonrefundable except if Garage Door Fix cannot deliver to the accepted address; in that case we refund it in full. If a return is approved, the buyer must arrange and pay to ship the complete door and all hardware in their original packaging. Damage or manufacturing-defect claims are reviewed separately; these terms do not limit rights required by law.

These pages are a design catalog, not a checkout. There is no public price or stock promise here. We review the supplied measurements, options, fulfillment, and complete written price before an order.

Compare all 16 styles