White · side chevron

Ryterna Alumax
A metal face you can leave plain—or give a precise milled pattern.
Alumax puts an aluminium facing on an insulated sectional door. Compare six designs, then confirm the finish and any glazing against your measured opening.

On the house
These AI-assisted design composites place the exact builder door previews below on Calgary-home concepts. They are not photographs of installations or factory-approved drawings. The point is to compare how each surface reads beside different siding and masonry.



In the configurator
These are actual builder renderings at a 16 × 7 ft preview size, not installation photos. ALU-4 and ALU-5 are milled designs; the windows are shown on Plain Alumax only. Your final panel layout and finish need a factory specification.
A directional pattern that draws the eye toward the sides.

The centre chevron gives a wide opening a focal point.

A quiet face with a narrow stack of four square windows.

The design
Alumax starts with an insulated double-steel-skin door and adds a smooth aluminium facing. The current builder shows five milled ALU patterns and a Plain version; the exact factory design must be confirmed in the quote. These give it a different surface from a standard steel-panel profile. The facing can suit houses with metal cladding or a clean architectural finish.
Choose between the plain aluminium face and a milled design first. The chevron pattern in the image is one design, not the default for every Alumax door. Compare the complete door with the house before choosing the RAL finish.
Make it yours
Start with the surface. The builder has Plain and ALU-1 through ALU-5, each with a different line arrangement.
Compare the chosen RAL finish with your window frames and cladding in daylight. A dark door can look very different on a phone.
The builder offers four frameless Matt windows on Plain Alumax. The window price and final dimensions need a written quote.
Before you choose
Our current builder shows frameless windows on Plain Alumax, not its milled ALU patterns. That is a builder choice, not a published factory compatibility rule. Ask us to confirm the chosen pattern, glazing dimensions, price and installation requirements with Ryterna.
Full View is more glass-forward. Slim-Line brings a narrower glazed rhythm to a more conventional sectional composition.
Common questions
No. Ryterna describes an aluminium facing over the door's base construction. The final panel build belongs on the factory specification.
Not in the current builder. Frameless windows are shown for Plain Alumax, not the milled ALU patterns.
Price planning
The Alumax configurator gives a budgeting estimate for the base door, selected pattern and RAL colour. Frameless windows on Plain Alumax are quoted separately and are not included in that estimate. We confirm the pattern, glazing, measured opening, freight and installation scope in a written price before requesting a deposit.
Plan your project
9 × 7, 9 × 8, 16 × 7, and 16 × 8 ft. Other openings are handled by inquiry after measurement.
Installation is available for addresses within a 30-minute drive of Calgary or Edmonton, subject to address confirmation in the written quote. Outside that area, door-only delivery is available across Canada; the buyer arranges installation.
This is the planned delivery or installation lead time for a confirmed order, not an inventory promise. We confirm the relevant date range before ordering.
The buyer is responsible for measuring the garage-door opening before placing an order. Share the measured width and height with us so the final specification can be reviewed before the factory order.
For a shipped door, the buyer is responsible for unloading the complete door and hardware at the delivery address, including arranging suitable people and equipment.
Made-to-order doors require a 50% deposit. It is nonrefundable except if Garage Door Fix cannot deliver to the accepted address; in that case we refund it in full. If a return is approved, the buyer must arrange and pay to ship the complete door and all hardware in their original packaging. Damage or manufacturing-defect claims are reviewed separately; these terms do not limit rights required by law.
These pages are a design catalog, not a checkout. There is no public price or stock promise here. We review the supplied measurements, options, fulfillment, and complete written price before an order.
Compare all 16 stylesKeep comparing

A narrow band of glass adds light without making the whole door a window.
Explore this style
Slim windows give the door a line of daylight without making glass the main feature.
Explore this style
Real wood cladding with patterns milled into the surface.
Explore this style